OpenCode status checks could cold-start throwaway servers, unrelated
conversations could block each other, and model, Continue, or remote paths
could replay or duplicate work under failure and backlog conditions. Settings
could also lose edits or overwrite unrelated model fields.
This update makes status checks passive, keeps per-conversation ordering while
allowing concurrency, preserves native long-running work with bounded display
capture and backpressure, narrows retries to known pre-dispatch failures, and
aligns remote Ask permissions without reducing Execute. It also keeps
Embedding updates narrow, improves settings and browser guidance, removes the
unused legacy Main gateway state, and records the validated Desktop 0.12.3 and
Agent 0.11.17 release metadata.
Release note: 改善 OpenCode 切换、多会话长任务、模型重试、远程 Ask/Execute 与设置保存可靠性，并完成 Desktop 0.12.3 / Agent 0.11.17 发布准备。
Model connections can now save bounded JSON request headers and top-level body fields. Direct requests and Continue support both; local OpenCode and DeepSeek Harness use only native header support, while the managed remote OpenCode gateway applies both.
Runtime, protocol, and authentication fields keep precedence. Custom values are ordinary connection settings, not credential storage. This migrates Runtime settings from v20 to v21 and updates the DeepSeek control and managed Runtime ACP capabilities.
Release note: 模型连接详情新增自定义请求头和请求体；直连与 Continue 支持两者，本地 OpenCode 和 DeepSeek Harness 仅应用原生支持的请求头，受管远程 OpenCode 支持两者，界面会明确提示生效范围。
Local embedded OpenCode serialized otherwise independent conversations, and GoodBuddy could stop long Runtime tasks after fixed tool, activity, model-call, or accumulated display-output limits.
Different conversations can now run concurrently while requests in the same conversation stay ordered. Dynamic MCP tools remain isolated to the current request. OpenCode, Continue, managed ACP, and the Agent model gateway no longer stop native execution at GoodBuddy-defined call counts or prompt-wide output totals; display copies truncate and transport queues apply backpressure instead. Prompt-wide quota fields are removed from the current contracts.
Per-call model settings, provider request timeouts, cancellation, and same-conversation ordering remain unchanged.
Release note: 修复本机 OpenCode 不同会话互相等待的问题，并移除 GoodBuddy 对单次 Runtime 工具、活动和模型调用次数的人为上限；长输出现在只截断展示或施加传输背压，不再取消原生任务。
The Linux routing test still referenced the obsolete bin/opencode name. With intentional path-only Runtime selection, that stale fixture was no longer masked by automatic discovery; use the locked opencode-ai 1.18.9 bin/opencode.exe entrypoint on every platform.
Keep the approved 0.12.0 notes and bilingual feature matrices explicit that local OpenCode paths are not prevalidated and fail only at actual launch.
GoodBuddy can now provide managed Node.js and on-demand Python to local Skills and stdio MCP servers, or validate an explicitly selected custom interpreter. The Capabilities and tools settings page exposes source selection, diagnostics, installation progress, cancellation, and removal while new processes receive immutable PATH snapshots.
Application settings migrate to v10. Local terminal and remote Host environments remain unchanged. Windows x64 native-source Node and Python paths are validated; OSS mirror publication, redistributed license resources, and the remaining native platform probes are recorded as release blockers.
Release note: 新增工具执行环境，可为本机 Skills 和 stdio MCP 使用 GoodBuddy 托管的 Node.js、按需安装的 Python，或经过验证的自定义解释器。
OpenCode health polling restored a ten-second startup limit, causing Linux ARM systems and QEMU environments that became healthy just after that boundary to be reported unavailable. Managed local OpenCode now retains health-based readiness detection while allowing up to thirty seconds for startup.
Release note: 修复部分 Linux ARM 设备切换 OpenCode 时因启动超过 10 秒而误报超时的问题；健康检查现在最多等待 30 秒。
OpenCode Task calls now appear as first-class subagents in local and managed SSH conversations, with stable status, persistence, terminal handling, and true event ordering instead of duplicate generic tool entries.
GoodBuddy no longer applies a fixed outer wall-clock total to OpenCode, Continue, DeepSeek Harness, or managed SSH Prompts. Runtime-owned limits, user cancellation, bounded control operations, output limits, and released Agent protocol compatibility remain intact. Desktop and Agent release metadata are synchronized at 0.11.13 with approved bilingual notes.
Release note: OpenCode 原生 Task 现在以独立子 Agent 展示；长任务不再被 GoodBuddy 固定总时限中止，并修复 OpenCode 启动识别、可配置 HTTP 服务地址与发布说明读取问题。
GoodBuddy previously treated one exact OpenCode stdout line as the startup signal, so harmless log formatting differences could report a timeout even when the server was already listening. It now polls the authenticated health endpoint on the loopback port that GoodBuddy selected, with bounded attempts and the original ten-second startup limit.
Release note: 修复 OpenCode 已启动但因监听日志格式未被识别而误报超时的问题；启动检测现在直接使用本机健康接口。
The bundled OpenCode server could be reported unavailable when slower Linux ARM systems needed more than ten seconds to initialize. GoodBuddy now allows thirty seconds for startup before terminating the server and reports the updated timeout.
Release note: 修复部分 Linux ARM 设备上 OpenCode 冷启动较慢时被误报为启动超时的问题。
Address reliability and consistency gaps across Agent Runtimes, persistence, settings, Knowledge, Magic Notes, Smart Heartbeat, and the download site. Runtime processes now have bounded lifecycle cleanup and atomic configuration rollback, while model packages and persisted mutations recover safely.
Add a configurable global shortcut, protect unsaved work, improve modal and keyboard behavior, localize the built-in project without rewriting stored data, and lazy-load heavy renderer routes under enforced bundle budgets. Align project forms and disabled controls with shared typography and interaction states, and strengthen website release metadata validation and navigation accessibility.
Release note: 修复 Runtime、设置、知识库、魔法笔记与智能心跳中的可靠性和交互一致性问题；新增可配置全局快捷键，改进无障碍与加载性能，并强化官网下载校验。
OpenCode and Continue customization was previously planned but unavailable, and Runtime-native capabilities were not represented consistently across providers. GoodBuddy now provides secure Main-owned customization settings, truthful native inventories, OpenCode Agents and Commands, Continue Rules and Prompts, DSH Web Search/Fetch, MCP Prompt and Resource metadata, and manual compaction where supported.
Native capabilities are presented in eleven accessible tabs with Tools separated from Commands, LSP, and Formatters. Tool source and Ask/Execute availability are explicit, external OpenCode remains connection-only, Continue reports unsupported static tool discovery instead of advertising unreachable Skills, and disposable inventory probes avoid retaining background runtimes.
Ask remains read-only at the Runtime boundary, Execute keeps the existing authorization controls, and credentials remain confined to Main.
Release note: 新增 OpenCode、Continue 与 DeepSeek Harness 的 Runtime 原生定制与真实能力清单；工具来源、Ask/Execute 可用性、上下文压缩和 MCP 元数据现在可清晰查看，同时继续保持 Main 进程凭据保护与现有权限边界。
GoodBuddy could share Skills across runtimes, but custom MCP remained limited and DeepSeek Harness could not manage third-party extensions. The app now provides a default-off DSH npm marketplace with managed installation, configuration, failure isolation, and packaged npm support, while assigned custom MCP is available to managed OpenCode, Continue Agent, and DeepSeek Harness in Execute.
Third-party DSH install scripts, initialization, and tools run with the current user's permissions. Ask remains read-only at dispatch, and turning off the marketplace hides management without disabling installed plugins.
Release note: 新增默认关闭的 DSH 插件市场，并让自定义 MCP 可分配给 OpenCode、Continue 和 DeepSeek Harness；安装第三方插件前会明确提示当前用户权限边界。
mesalogo